₹2,699.00
+ ₹554.99 शिपिंग

Heavy Duty Leather Pliers

  • ब्रांड: Unbranded

Heavy Duty Leather Pliers

  • ब्रांड: Unbranded
RRP: ₹4,049.00
मूल्य: ₹2,699.00
आपकी बचत: ₹1,350.00 (33%)
द्वारा बेचा गया:
₹2,699.00
+ ₹554.99 शिपिंग

स्टॉक में है

14-दिन की रिटर्न पॉलिसी

पेमेंट के तरीके:

विवरण

Heavy Duty Leather Pliers

Name: Punching pliersLength: 230mmColor: silver, red.Surface treatment: electroplatingA pair of pliers can punch 6 holes: 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm: There is a little indentation on the opposite side of the punched hole), the indentation is because this part comes out of the cold press at the end, it is relatively thick, and it is impossible to avoid traces, but it will not affect the use of the punching pliers.Operation precautions: Before the buyer receives the pliers and starts to operate the hole, please turn the turntable to the required hole for air pressure, and observe whether the lower punch and the copper table are aligned. Then operate on the flat copper platform. This is not easy to damage the punch, and preparation is also important.Note: Because the material of many belts is different, some belts are covered with a layer of cloth. If you have less strength, you may not be able to get through the holes when you press it once. At this time, you can press again at the same position on the reverse side. once (usually with indentation) so the holes you want are readyHow to perforate the belt:1. "Slotted" screwdriver 2. "Cross-shaped" screwdriver 3. Scissors 4. Punch pliers.2. If it is an automatic buckle belt, first pry open the fixed teeth of the automatic buckle.3. Measure your waist circumference, and use scissors to remove the excess part of your head.Fourth, install the belt buckle, press the fixed teeth, and you are done.5. If it is a pin buckle belt, use a screwdriver to unscrew the screw on the back of the pin buckle head.6. Measure your waist circumference, and use scissors to remove the excess part of your head.7. Overlap the cut belt part with the belt, and then make a mark with the punching pliers, then put the cut part under the belt head and cushion it, and then use the punching pliers to align the mark to punch the hole. .8. Connect the buckle head and the belt with screws.Nine, the adjustment method of the smooth buckle belt, first unscrew the screw on the back of the smooth buckle with a screwdriver.10. Compare your waistline and cut off the excess from the head.11. The punching method is the same as the pin buckle belt12. Then use a screwdriver to reconnect the buckle head and the belt body.
  • Fruugo ID: 96307970-202564926
  • EAN: 967835683412

उत्पाद सुरक्षा जानकारी

कृपया नीचे दी गई इस उत्पाद से संबंधित विशिष्ट उत्पाद सुरक्षा जानकारी देखें

निम्नलिखित जानकारी इस उत्पाद को बेचने वाले स्वतंत्र तृतीय-पक्ष खुदरा विक्रेता द्वारा प्रदान की गई है।

उत्पाद सुरक्षा लेबल

CE Mark
सुरक्षा चेतावनियाँ: Please use according to the instruction manual
सामग्री: As shown
निर्माता भाग संख्या: S0813531
मॉडल नंबर: 967835683412
क्रम संख्या: 967835683412

डिलीवरी और वापसी

3 दिनों के भीतर भेजा जाएगा

  • STANDARD: ₹554.99 - के बीच वितरण मंगल 13 जनवरी 2026–मंगल 20 जनवरी 2026

चीन से शिप हो रहा है।

हम आपके द्वारा ऑर्डर किए गए उत्पादों को पूरी तरह से और आपके विनिर्देशों के अनुसार डिलीवर करने की पूरी कोशिश करते हैं। हालाँकि, यदि आपको अधूरा ऑर्डर या आपके ऑर्डर से कोई अलग आइटम प्राप्त होता है या किसी अन्य कारण से यदि आप अपने ऑर्डर से संतुष्ट नहीं हैं तो आप ऑर्डर या ऑर्डर में शामिल कोई भी उत्पाद वापस कर सकते हैं और आइटम के लिए पूर्ण रिफ़ंड प्राप्त कर सकते हैं। सम्पूर्ण वापसी पॉलिसी दिखाएँ

उत्पाद अनुपालन विवरण

कृपया नीचे दी गई इस उत्पाद से संबंधित विशिष्ट अनुपालन जानकारी देखें।

निम्नलिखित जानकारी इस उत्पाद को बेचने वाले स्वतंत्र तृतीय-पक्ष खुदरा विक्रेता द्वारा प्रदान की गई है।

निर्माता:
नीचे Fruugo पर बिक्री किए जाने वाले संबंधित उत्पाद निर्माता के संपर्क विवरण की जानकारी संबधी सूचना है।

  • Shenzhen Hefenghui E-commerce Co., Ltd
  • Shenzhen Hefenghui E-commerce Co., Ltd
  • Building 8-23 West of Poly Twelve Oaks Manor, No. 560 Tangxun North Road
  • Wuhan
  • China
  • 430000
  • xuantongd@outlook.com
  • 18682251053

यूरोपीय संघ(EU) में जिम्‍मेदार व्यक्ति:
नीचे यूरोपीय संघ में जिम्मेदार व्यक्ति की संपर्क जानकारी संबंधी सूचना है। जिम्मेदार व्यक्ति यूरोपीय संघ में स्थित पदनामित आर्थिक ऑपरेटर है जो यूरोपीय संघ में बिक्री किए जाने वाले संबंधित उत्पाद संबंधी अनुपालन दायित्वों के लिए जिम्मेदार है।

  • EUBRIDGE ADVISORY GMBH
  • EUBRIDGE ADVISORY GMBH
  • Virginia Str2, 35510 Butzbach, Hessen, Germany
  • Butzbach
  • Germany
  • 35510
  • Hunter@pokza.com
  • +49 68196989045