Heated Universal Motorcycle Handles 12v 2025

1 Pair 22mm(7/8") Motorcycle Electric, Hot Heating Warm Handlebar Mounts 1 x winding stem extender bag (about 100 pieces) Temperature control allows you to find the optimal temperature while driving. Advanced electronic thermostat system does not consume energy, helps protect the battery. The texture on the handlebar surface ensures anti-slip and ensures a safe ride. Made of plastic, comfortable to touch, durable and resistant to corrosion. Fits most motorcycles with a 22 mm (7/8 inch) diameter handlebar. Technical data: Material: plastic Black color Input Voltage: 12 V Power: adjustable 15 W-35 W Temperature: maximum temperature 70 ℃, minimum temperature 50 ℃ Length: 123mm/4,8 inch Hole diameter: 22mm/0,87 inch Package weight: approx. 250g Mounting: Fits most 12V motorcycles with a 22mm (7/8") diameter handlebar How to use: [1] Dismantle the original steering wheel [2] Wet the inner opening of the left steering wheel with soap and water, and the amplitude of twisting should not be too large during installation [3] When installing the balancer on the left handlebar, adjust the position of the balancer so that it is slightly separated from the handlebar and do not squeeze the handlebar when tightening the screw [4] If the left steering wheel slides over the steel pipe during use, remove the balancer and attach it with a few drops of glue from the end of the steering wheel [5] Power cord, red wire is connected to positive pole, and black wire is connected to negative pole (not reversed) [6] When installing the left steering wheel, leave the power cord to rotate The package includes: 1 x Pair of Motorcycle Steering Wheel 1. Please note that the temperature cannot be adjusted if the cable is connected incorrectly. 2. 3. 4. When installing the left steering wheel, do not twist it too much. Excessive twisting will cause the heating wire to shift. 5. For models with a balancer, the mounting position of the balancer should be adjusted. 6. Do not squeeze the steering wheel when tightening the screws, the balancer is slightly separated from the steering wheel. 7. If the balancer mounting position cannot be adjusted, add a spacer between the balancer and the steering wheel. 8. Excessive steering wheel compression will cause difficulties in turning the switch on the steering wheel and unusual damage, such as squeezing the heating wire from the steering wheel surface. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.