Happymodel Mobula7 1S HD Spare Part Openlager High-speed Serial Port Blackbox Module For Betaflight

₹3,999.00
+ ₹620.49 शिपिंग

Happymodel Mobula7 1S HD Spare Part Openlager High-speed Serial Port Blackbox Module For Betaflight

  • ब्रांड: Unbranded

Happymodel Mobula7 1S HD Spare Part Openlager High-speed Serial Port Blackbox Module For Betaflight

  • ब्रांड: Unbranded
मूल्य: ₹3,999.00
द्वारा बेचा गया:
₹3,999.00
+ ₹620.49 शिपिंग

स्टॉक में है

14-दिन की रिटर्न पॉलिसी

पेमेंट के तरीके:

विवरण

Happymodel Mobula7 1S HD Spare Part Openlager High-speed Serial Port Blackbox Module For Betaflight

Happymodel Mobula7 1S HD Spare Part Openlager High-speed Serial Port Blackbox Module For Betaflight Fpv Drone support Gyroflow Precise details: Specifications: : Happymodel Size: 18x15.5x4.5 With Built-in Voltage booster module Working voltage: 3v~4.35v Weight:1.5gram SD Card support max to 32GB SD Card need to use FAT32 Format Notes: Need to careful to insert the TF SD Card , and dont pull it out while install the battery. Blackbox is a very useful tools to the FPV pilots, They are used to using black box data analysis software to tune PID and filter parameters. Due to the limited size of many flight controllers, especially AIO flight controllers, although they have onboard black box functions, their storage capacity is very limited. Our Blackbox is based on the latest Openlager hardware, uses a separate STM32F411 as the processor, has an independent TF card slot, and supports up to 32GB memory TF card. The growing popularity of Gyroflow, an open source stabilizer, makes the storage and reading of gyro data in flight controllers more important. Our Mobula7 1S HD aircraft is equipped with this Black box. The Black box also has a boost module to power the Runcam Split3-lite, making it run stably when the battery voltage is low. Prepare your own Micro SD card. Connect the Blackbox module and the flight controller correctly. Refer to the wiring diagram for the connection method. Use our Mobula7 1S HD as a sample. Enable Blackbox logging in the peripherals of UART1, set the baud rate to be 2000000. For Gyroflow useage, Move to blackbox tab the and select Serial Port, 250HZ, GYRO_RAW. After each setting is completed, click the Save and Restart button. LED Indicator meaning: Red light off: SD card detected, ready to work Red light flashes slowly: no SD card Red light flashes quickly: it will only appear after the drone was armed, and the black box normally writes the data returned by the flight controller Reading of black box files: Export the LOG000 file of the SD card to the computer (the file serial number is automatically incremented by 1 each time the power is turned on), where the CFG file is the black box configuration file, this can be exported without. LOG000 is the log file generated after unlocking this time. It can be opened with Betaflight Blackbox Explorer software and the recorded flight data can be seen. Package Included: 1x Blackbox Module
  • Fruugo ID: 367125941-794787202
  • EAN: 9783225390255

उत्पाद सुरक्षा जानकारी

कृपया नीचे दी गई इस उत्पाद से संबंधित विशिष्ट उत्पाद सुरक्षा जानकारी देखें

निम्नलिखित जानकारी इस उत्पाद को बेचने वाले स्वतंत्र तृतीय-पक्ष खुदरा विक्रेता द्वारा प्रदान की गई है।

उत्पाद सुरक्षा लेबल

CE Mark
सुरक्षा चेतावनियाँ: Not suitable for children under 24 months old,choking hazard,adult supervision required

डिलीवरी और वापसी

3 दिनों के भीतर भेजा जाएगा

  • STANDARD: ₹620.49 - के बीच वितरण बुध 07 जनवरी 2026–बुध 14 जनवरी 2026

चीन से शिप हो रहा है।

हम आपके द्वारा ऑर्डर किए गए उत्पादों को पूरी तरह से और आपके विनिर्देशों के अनुसार डिलीवर करने की पूरी कोशिश करते हैं। हालाँकि, यदि आपको अधूरा ऑर्डर या आपके ऑर्डर से कोई अलग आइटम प्राप्त होता है या किसी अन्य कारण से यदि आप अपने ऑर्डर से संतुष्ट नहीं हैं तो आप ऑर्डर या ऑर्डर में शामिल कोई भी उत्पाद वापस कर सकते हैं और आइटम के लिए पूर्ण रिफ़ंड प्राप्त कर सकते हैं। सम्पूर्ण वापसी पॉलिसी दिखाएँ

उत्पाद अनुपालन विवरण

कृपया नीचे दी गई इस उत्पाद से संबंधित विशिष्ट अनुपालन जानकारी देखें।

निम्नलिखित जानकारी इस उत्पाद को बेचने वाले स्वतंत्र तृतीय-पक्ष खुदरा विक्रेता द्वारा प्रदान की गई है।

निर्माता:
नीचे Fruugo पर बिक्री किए जाने वाले संबंधित उत्पाद निर्माता के संपर्क विवरण की जानकारी संबधी सूचना है।

  • Nanpingshiyanpingquduohuixinxikejiyouxiangongsi
  • Nanpingshiyanpingquduohuixinxikejiyouxiangongsi
  • Longgang District Nanwan Street Fujing Garden 2 building 1003
  • Shenzhen
  • CN
  • 518116
  • Pirgwlo@outlook.com
  • 8618273312972

यूरोपीय संघ(EU) में जिम्‍मेदार व्यक्ति:
नीचे यूरोपीय संघ में जिम्मेदार व्यक्ति की संपर्क जानकारी संबंधी सूचना है। जिम्मेदार व्यक्ति यूरोपीय संघ में स्थित पदनामित आर्थिक ऑपरेटर है जो यूरोपीय संघ में बिक्री किए जाने वाले संबंधित उत्पाद संबंधी अनुपालन दायित्वों के लिए जिम्मेदार है।

  • peter
  • SUCCESS COURIER SL
  • PLANTA 1. DERECHA, OFICINA 3, Fuenlabrada,CALLE RIO TORMES NUM.
  • Madrid
  • Spain
  • 28947
  • successservice2@hotmail.com
  • 34910602659