Features: Compact Size: Lightweight and portable, space-saving design makes it can be carried out to work. It is a utility maintenance and DIY tools for on-site debugging. Fine Workmanship: High-sensitivity buttons are easy to use, Type-C port supports firmware upgrade and charging, folding bracket for convenient placement, gear toggle buttons to switch settings as needed. 2.8inch Digital Display: Equipped with 320 x 240 resolution color display, with bright colors and high contrast, you can see the data clearly. Efficient and Accurate: Multiple parameters measurement, the oscilloscope has a real-time sampling rate of 2.5MS/s, 200kHz bandwidth, with complete trigger functions (single, normal, automatic), both for periodic analog signals or non-periodic digital signals can be freely used, support switch between rising-edge trigger mode and falling-edge trigger mode, support up to 400V voltage signal measurement. 1KHz Calibration Squarewave: Supplied with a 1KHz calibration squarewave, easy and convenient probe calibration. One-button Automatic Adjustment: Equipped with efficient one-button AUTO that displays the measured waveform without tedious adjustment. With waveform measurement display, a variety of waveform measurements to meet your daily needs. Wide Applications: Intelligent anti-burning, applicable to a variety of occasions, suitable for utility measurements, DIY learning, automobile repairing, home appliance repairing, research and teaching, outdoor maintenance, etc. Specifications: Name: Digital Oscilloscope Material: plastics Type: standard configuration, high configuration (optional) Battery: 1 x rechargeable 1000mAh lithi um battery (included) USB charging: 5V/1A Display: 2.8inch/PPI:320 x 240 Bandwidth: 200KHz Realtime sampling rate: 2.5MS/s Vertical sensitivity: 10mV/Div-20V/Div (in 1-2-5 increments) Time base ranges: 10μs/Div-50s/Div (in 1-2-5 increments) Calibration squarewave frequency: 1K Duty cycle: 50% Voltage ranges: X1: 40V (Vpp:80V); X10: 400V (Vpp:800V) Trigger mode: automatic/regular/single Item size: 99 x 68 x 20mm / 3.90 x 2.68 x 0.79in Item weight: 100g / 3.53ounce Package size: Standard configuration: 125 x 85 x 40mm / 4.92 x 3.35 x 1.57in High configuration: 210 x 150 x 50mm / 8.27 x 5.91 x 1.97in Package weight: Standard configuration: 168g / 5.93ounce High configuration: 243g / 8.57ounce Packing List (Standard Configuration): 1 x Digital Oscilloscope 1 x Type-C Cable 1 x General Probe 1 x Guideline OR Packing List (High Configuration): 1 x Digital Oscilloscope 1 x Type-C Cable 1 x General Probe 1 x P6100 High Pressure Probe 1 x Adapter 1 x Guideline Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.