DS213 oscilloscope standard class lineup: oscilloscope host (built-in lithium battery) = 1, (X1) oscilloscope probe = 1, (X10) oscilloscope probe = 1, warranty card = 1, L-type hexagonal screwdriver = 1, micro-usb charging cable = 1. DS213 is a 5-trace, 4-wire, general-purpose digital storage oscilloscope for electronic engineering tasks based on the ARM Cortex M3 core. DS213 adopts the FPGA's management control of the external ADC and the data caching mode of operation, and provides four application partitions for loading and upgrading the firmware of up to four different applications; and the built-in 8MB USB flash disk for storing the waveforms as well as upgrading the Built-in 8MB USB flash drive for storing waveforms and upgrading system firmware. The oscilloscope code application layer is open source, users can develop oscilloscope firmware according to their needs. Product Features: Small size, light weight, easy to carry, handheld operation; Waveform data can be stored, waveform analysis and comparison is more efficient and intuitive; A variety of triggering methods, support for positive and negative edge triggering, logic triggering, pulse width triggering; Powerful waveform processing capabilities, can automatically measure voltage, frequency, pulse width and other parameters. Technical parameters: Main control CPU: ARM Cortex M3 FIFO and control: FPGA ADC: HWD9288-100 Number of analog channels: 2 ([CH_A] [CH_B]) Number of digital channels: 2 ([CH_C] [CH_D]) Number of operation channels: INV [CH_A], INV [CH_B], [CH_A]+[CH_B], [CH_A]-[CH_B], [CH_C]&[CH_D], [CH_C] [CH_D] Vertical sensitivity: 10mV-10V/div (1-2-5 STEP) (when using x1 probe) 100mV-100V/div (1-2-5 STEP) (when using x10 probe) Vertical resolution: 8 bits Storage depth: 4 channels 4*4K Input coupling method: DC, AC Maximum input voltage: 40Vpp with x1 probe 400Vpp with x10 probe Soft trigger type: positive and negative edge trigger, pulse width trigger, logic trigger Trigger Mode: Auto, Standard, Single, Instant Sweep Trigger source: [CH_A] [CH_B] [CH_C] [CH_D] Signal source: Square wave: 10Hz to 8MHz total 20 3Vpp signal source Sine, Triangle, Ramp: 10Hz to 20KHz total 11 3Vpp signal sources File storage capacity: built-in 8M USB disk File storage format: BMP, BUF, CSV Automatic Measurement Type: Maximum, Minimum, Peak, Average, RMS, Frequency, Period, Pulse Width, Duty Cycle Cursor measurement: time value, amplitude value Display mode: 4-line display: 1-line: [CH_A], HIDE 2 lines: [CH_B], HIDE 3 lines: [CH_C], REC_1, REC _2, REC _3, REC _4, HIDE 4-wire: [CH_D], [CH_A]+[CH_B], [CH_A]-[CH_B], [CH_C]&[CH_D], [CH_C] [CH_D], HIDE Sampling mode: Real-time sampling Sampling rate: 100M Sa/s Battery power: 1000mAh