SA6 is a simple portable spectrum analyzer and signal range, designed to display the signal spectrum in the frequency range of 35 to 6200 MHz. The analyzer finds the amplitude and frequency of the components of the analyzed process. The spectrum analyzer can process signals from all widely used technologies: Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, etc. Another important feature is the additional function of the tracking generator, which makes it possible to measure the frequency response of passive or (such as filters or amplifiers). The software allows measurement of SWR and return loss modules. This requires an external directional coupler and a set of calibration measures. SA6 is mainly used for on-site operation. The equipment is , light in weight and low in energy consumption. It enables service centers and maintenance to perform on-site HF analysis for commissioning and repair work. In addition, the spectrum analyzer is the perfect solution for repair shops and radio enthusiasts. 3.2 inch color resistive touch screen Wide frequency range: 35 to 6200 MHz Fast scanning of frequency range: 500 points per point High measurement accuracy: 2dB within 70-75dB dynamic range Compatibility of -based computers The device can be used with the help of a PC It is particularly convenient to use on site: the weight is as low as 380 grams, the size is 150x75x23 mm, the power supply can run continuously for up to 4 hours, and the wired data transmission to the PC. Colour:Black Material:Aluminum Alloy Package Contents: 1 * signal generator 1 * USB cable 2 * SMA cables 4 * adapters 1 * stylus Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.