PAPER CUTTING GUILLOTINE TRIMMER CUTTER FOR A3 PAPER GUILLOTINE - TRIMMER WIDE APPLICATION – the device is adapted to support paper formats up to a maximum size of A3, making it practical and versatile. liandgt; PRECISE GRADUATION – miarka centimeter and inch, as well as siatka make it possible to accurately set the paper before making the cut. liandgt; SPECIFICATION - dimensions (L/W) 38/14,7cm; maximum format of A3 paper; weight 280g. liandgt; ANGLE METER – angular division marked on the scale guarantees precise cutting of individual sheets at the required angle, which extends the possibilities of using the guillotine. liandgt; SAFE – the replaceable blade is placed in a movable tab, thanks to which it is possible to safely and accurately arrange the paper before cutting. liandgt; SPECIFICATION maximum format of paper: A3liandgt; dimensions (L/W): 38/14,7cmliandgt; weight: 280gliandgt; weight with packaging: 370gliandgt; Paper sheet processing is useful not only during office work, but also bookbinding. The paper guillotine will work well in formatting documents, adapting printed materials, advertising and all other activities performed using sheets. The paper cutting tool supports a wide range of formats, up to a maximum of A3. The trimmer is therefore universal and can be a tool that successfully will work in various types of tasks. The precision blade cuts up to 12 sheets of paper with a weight of up to 80g/sqm at a time. Laying the paper and determining the cutting line is facilitated by the division expressed in centimeters and inches. The guillotine also has an angular designation, which allows to cut paper at an angle from 45° to 90°. For smaller paper formats and simpler work, it is enough to use a basic grid with measures, and for larger formats it is necessary to spread the additional graduation fixed on the bottom of the device. The paper cutter has a blade, which was placed on a raised guide. Thanks to this solution, the exact arrangement of paper does not cause difficulties. When adjusting the layout of the card on the guillotine, the blade is hidden in the guide, which protects the user from possible injury. After determining the correct position of the paper, the guide is lowered, and the cut is made by pressing the blade located on the spring-loaded mechanism fixed on the slider. The trimmer is light and handy, so it can be easily stored on a shelf or in a drawer, as well as quickly and efficiently placed in a designated place. Its stability guarantees up to 9 support points, which are foam, non-slip feet. The guillotine has a replaceable blade, and this action can be done after pulling out the slider in which it is mounted. To do this, set the slider in the middle of the guide, gently open it to the sides and pull out the whole. Then carefully disassemble the slider, pull out the blade and replace it with a new one. Paper guillotine will be helpful not only for office and bookbinding work. It can also be successfully used in performing various types of decorative and artistic activities, and even in the preparation of decoupage elements.