Feature: 1. Advanced Technology: Double row composite contacts, horizontal pull structure, micro motor advanced energy storage and microelectronic control technology are adopted to basically realize no arc crossing. 2. 4 Operation Functions: This switch has 4 operation functions, emergency manual operation, electric remote control operation, emergency disconnection operation under automatic control, and automatic control operation. 3. Reliable: The load isolation actuating switch is equipped with a mechanical interlock device to ensure the reliable operation of the main and standby power supplies without mutual interference. 4. Multi Protection: The switch supports multiple protection functions, including short circuit, overload, phase loss and undervoltage protection, which is safe and reliable. 5. Applicable Scenarios: The switch can be used in homes and public places, especially in office buildings and public places that need fire protection. Specification: Item Type: Generator Transfer Switch Material: PC Rated Working Voltage: AC400V Control Voltage: 220V Rated Isolation Voltage Ui: 1000V Rated Impulse Withstand Voltage Uimp: 6KV Rated Short Time Withstand Voltage: 5kA Usage Category: AC 33B Rated Production Capacity: 10Ie Rated Breaking Capacity: 10Ie Rated Power: 50, 60HZ Grade: PC Working Temperature: - 20 to 45 ℃ (24h average value shall not exceed 35 ℃) Operating Humidity: The average humidity at 40 ℃ shall not exceed 50%, and no condensation is allowed. Package List: 1 x Generator Transfer Switch1 x Handle 2 x Key 1 x Manual 12 x Bolt 12 x Nut Note: 1. The left and right mounting brackets of the change over switch must be fixed on the same flat plane. The size of the mounting hole should be adjusted according to the actual situation. It is strictly prohibited to use the wrong size of the opening to forcibly install the switch, which will lead to the internal deformation of the switch, or even direct damage to the switch. 2. It is recommended to use busbar for the installation of switches above 2000A. If the cable installation will increase the stress of the installation bracket, please add effective reinforcement measures.3. Vibration and gas: in its use environment, there should be no strong vibration or impact, nor should there be harmful gases that corrode metals and damage insulation materials.4. Surrounding materials: no serious dust, conductive particles or explosive hazardous substances.