Fitment: For Kawasaki ER-6F 2012-2017 For Kawasaki ER-6N 2012-2017 For Kawasaki KLE650 2010-2017 For Kawasaki Ninja 250R (Fi model) 2013-2015 For Kawasaki Ninja 300 2013-2018 For Kawasaki Ninja 400R 2013-2016 For Kawasaki Ninja 400 2018 For Kawasaki Ninja 650 2012-2016 For Kawasaki Ninja 1000 2011-2016 For Kawasaki Versys 650 2010-2018 For Kawasaki Versys 1000 2012-2018 For Kawasaki VN900 2011-2015 For Kawasaki Vulcan S 650 2015-2018 For Kawasaki Vulcan 900 2011-2018 For Kawasaki W800 2011-2017 For Kawasaki Z300 2015-2016 For Kawasaki Z650 2017-2018 For Kawasaki Z750 2010-2012 For Kawasaki Z750R 2011-2012 For Kawasaki Z800 2013-2017 For Kawasaki Z800e 2013-2017 For Kawasaki Z1000 2010-2016 For Kawasaki Z1000SX 2011-2016 For Kawasaki ZX-6R 636 2006 For Kawasaki ZX10R 2009 For Kawasaki ZRX1200 2011-2015 For Kawasaki Brute Force 750 (ATV) All Years For Kawasaki Mule (ATV) All Years For Kawasaki Teryx (ATV) All Years Condition: Color of Light Source: Red, Blue, Green, White, Orange Item Name: Speed Gear Display Indicator Size: 4cm x 4cm x 4cm / 1.57in x 1.57in x 1.57in Features: - Displays current gear number - Indicates gear from 1 to 6, including neutral - Fast gear detection using ECU data via diagnostic connector - More accurate and faster than speedometer or tachometer-based indicators - Universal mounting design allows installation in various locations - Plug-and-play setup with no programming required - Auto-learning function for seamless operation Description: This gear position indicator is designed for fuel-injected Kawasaki motorcycles equipped with an onboard diagnostic system (OBD) connector, also known as the Kawasaki Diagnostic System (KDS). Unlike traditional gear indicators that rely on speed or RPM signals, this unit connects directly to the diagnostic port to receive real-time data from the ECU, ensuring faster and more accurate gear readings. The display automatically learns your bikes gear pattern with no manual programming. It features a neutral indicator and supports up to 6 gears. Please note that gear detection requires the engine to be running and the clutch to be released, as the system calculates gear position based on engine and vehicle data. Installation: 1. Locate the 4-pin diagnostic connector (KDS) under the seat, typically near the ECU. It is usually black, grey, or semi-transparent and may have a protective cap. 2. Some models have two diagnostic portstest both if needed. Connecting to the incorrect port will not damage your motorcycle. 3. Remove the cap and plug in the gear indicator. 4. Route the cable along the frame to the desired display location. 5. Peel off the protective film and mount the display securely. 6. Use included cable ties to secure the wiring, ensuring no interference with steering or moving parts. Troubleshooting: If the display does not activate, verify the diagnostic connector location and ensure the unit is properly plugged in. Try both connectors if two are present. Ensure the ignition is on and the engine is running during testing.