Garden Nursery Fruit Tree Pruning Shears Scissor Grafting Cutting Tools SetsFeatures:Rootstock and scion it is easy to match the U-cut,V-cut or -cut,rapid healingBlade can be replacedUse the pruner to cut useless branches from the plantThis product is suitable for fruit trees, tree grafting. Such as grapes citrus, loquat and other fruit trees branches, weatermelon, cucumber, tomato, eggplant and other vegetable seedings.This product has a slightly sticky, no knotting, can improve labor efficency.With the home use, will greatly improve efficency and reduce labor costs.And it is a good helper for vegetable, fruit grower. Materials: carbon steel,ABSColor: blackCut grafting stocks diameter from 5mm/0.2-1.4cm/0.55Trimming blades thickness: 3mm/0.12Size: 22cm x 10cm/8.66inch x 3.94inch (1cm=0.39Inches) Grafting Tape Width: 3cm/0.79How to use:Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make the cut,repeat this step to cut stem from the donor plant.Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible.If the stock and donor plant are not the same size, match on the side only.Step 3: Place sterlizing material around the joint, and bind with tape,the sterilizing material will protect against bacteria and weather conditions.Step 4: Use the pruner to cut useless branches from the plant.Step 5: The grafting tool with V U blade and the end of blade both can cut, one piece blade can be used as two pieces blade,so you would have total six pieces blade.Note:Keep out of reach of childrenDo not use on dry or old hard woodPackage Included:1 x Fruit Tree Pruning Shears Grafting Cutting Tool1 x Grafting Tape