Features 2 MODES: 1. PIR motion sensor mode, On key turns on the light, and the indicator light turns green. If motion is detected, the LED will light up, and if no motion is detected within 15 seconds, it will automatically turn off; 2. Normally on mode, press a 3 GEARS: Each light has 3 gears, namely 10LED (single row light on), 20LED (2 rows light on), and 30LED (3 rows light on). Short press the mode button to easily switch, suitable for various lighting scenarios. EASY TO INSTALL: Remove the tape from the magnetic bracket to stick to any flat surface, and then gently place the lamp on the magnetic bracket to complete the installation. The lamp can be disassembled and charged at will. USB CHARGING: Each lamp is equipped with an 800mAh rechargeable battery. Just use the USB data cable included with the light to charge them. After being fully charged (blue light), it is induced to light up 5 to 8 times a day and continuously used for up WIDELY USED: Very suitable for maintenance, reading, jewelry appraisal and other work, suitable for placement in bedrooms, closets, cabinets, workshops, garages, staircases, corridors, storage rooms, etc. Specification: Item Type: Motion Sensor Light Material: ABS, PC, Aluminum Alloy  Sensing Method: Human infrared sensing Induction Control: Built in light sensor Induction: 10 feet/120 ° LED Quantity: 30pcs LED Lifespan: Over 100000 hours LED Brightness: 350LM Light Color: Cold white light Lamp Battery: 1 x 800mAh rechargeable battery (shipped with built in battery) Battery Usage: Charging and discharging more than 500 times Battery Fully Charged Usage Frequency: Greater than 600 times Induction On Time: 15 seconds Package List: 1 x Light  1 x USB Cable  1 x Magnetic Suction Bracket with Sticker   1 x Manual Package List 1 x Light 1 x USB Cable 1 x Magnetic Suction Bracket with Sticker 1 x Manual