FV-200Hz10V Frequency Voltage Converter Module 0~200hz to 0~10V Digital to Analog Signal Module

₹1,599.00
और मुफ़्त शिपिंग

FV-200Hz10V Frequency Voltage Converter Module 0~200hz to 0~10V Digital to Analog Signal Module

  • ब्रांड: Unbranded

FV-200Hz10V Frequency Voltage Converter Module 0~200hz to 0~10V Digital to Analog Signal Module

  • ब्रांड: Unbranded
RRP: ₹2,749.00
मूल्य: ₹1,599.00
आपकी बचत: ₹1,150.00 (41%)
द्वारा बेचा गया:
₹1,599.00
और मुफ़्त शिपिंग

स्टॉक में है

हम निम्नलिखित भुगतान विधियाँ स्वीकार करते हैं

विवरण

Features 1、The converter module is to convert 0~200hz digital signal into 0~10V analog signal. 2、The module can be used for interface conversion between PLC and frequency converter or matching control of interface between motion control card and frequency converter. 3、Input pulse level of 5/12/24V can be directly input without resistance.But input signal frequency should maintain more than 0.5 seconds. 4、The module is made of premium material,durable and has long service life. 5、Professional and practically designed for premium working performance. Specification Features: The converter module is to convert 0~200hz digital signal into 0~10V analog signal. The module can be used for interface conversion between PLC and frequency converter or matching control of interface between motion control card and frequency converter. Input pulse level of 5/12/24V can be directly input without resistance.But input signal frequency should maintain more than 0.5 seconds. The module is made of premium material,durable and has long service life. Professional and practically designed for premium working performance. Specification: Size:4.5 x 4.7 x 1.7cm / 1.77 x 1.85 x 0.67in Relationship,Linearity: 20Hz to 1V 100hz to 5V 200hz to 10V Package List: 1 x Converter Module Note: At 24 levels, the power supply needs to be powered by 24VDC 3. The signal input end is isolated by diaphragm. Guaranteed anti-interference ability. 4. If you need to use PLC, support NPN type. Must have a ground wire. 5, if you need to use the encoder, the encoder is required to continue to rotate at a constant speed for more than 0.5 seconds. 7. If the signal input is turbine flow, etc., due to signal matching, an 817 diaphragm and a resistor must be added to match the flowmeter to normal function. 8. Correspondence in use If there is a deviation, you can adjust the blue potentiometer on the board to calibrate. At the time of shipment, we have adjusted the F/v potentiometer to a certain correspondence. It is generally not recommended to adjust it by itself. Package List
  • Fruugo ID: 271639081-602151534
  • EAN: 9308869117008

उत्पाद सुरक्षा जानकारी

कृपया नीचे दी गई इस उत्पाद से संबंधित विशिष्ट उत्पाद सुरक्षा जानकारी देखें

निम्नलिखित जानकारी इस उत्पाद को बेचने वाले स्वतंत्र तृतीय-पक्ष खुदरा विक्रेता द्वारा प्रदान की गई है।

उत्पाद सुरक्षा लेबल

CE Mark
सुरक्षा चेतावनियाँ: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.

डिलीवरी और वापसी

2 दिनों के भीतर भेजा जाएगा

  • STANDARD: मुफ़्त - के बीच वितरण सोम 13 अक्तूबर 2025–शुक्र 17 अक्तूबर 2025 - मुफ़्त

चीन से शिप हो रहा है।

हम आपके द्वारा ऑर्डर किए गए उत्पादों को पूरी तरह से और आपके विनिर्देशों के अनुसार डिलीवर करने की पूरी कोशिश करते हैं। हालाँकि, यदि आपको अधूरा ऑर्डर या आपके ऑर्डर से कोई अलग आइटम प्राप्त होता है या किसी अन्य कारण से यदि आप अपने ऑर्डर से संतुष्ट नहीं हैं तो आप ऑर्डर या ऑर्डर में शामिल कोई भी उत्पाद वापस कर सकते हैं और आइटम के लिए पूर्ण रिफ़ंड प्राप्त कर सकते हैं। सम्पूर्ण वापसी पॉलिसी दिखाएँ