Feature:1. Applicable Model with CAN Interface: Fits for Allure (3.6L) 2005, for LaCrosse (3.6L) 2005, for Rainier (5.3L) 2005, for Rendezvous (3.6L) 20042005.2. Practical in Use: Could update via 32MB software card, removable hardware modules provide insurance against scan tool obsolescence, and has large, easy to read backlit screen.3. Main Function: Capture stored DTCs, freeze frame, and failure record for later review, view status of diagnostic tests as they run, provide bi directional control when performing power train, chassis, and body diagnostics.4. Specification: Microprocessor: 32 bit,16 MHz, memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion. Communications: Integral RS232 communication port.5. Installation: CAN diagnostic interface module connects between the diagnostic link cable and the OBD adapter, comes with Authentic software and provides support for on board diagnostics on all systems 19922011.Specification:Item Type: for Tech2 Flash TesterMaterial: ABSUpdate: Via 32MB Software CardSoftware Version: 32.007Fits for SAAB English 148Replacement for OPEL English 165 (Support Cars from 1997-2014)English 149 (Support Cars from 1999-2013)Replacement for SUZUKI English 01.210.020Replacement for ISUZU English K line 11.53CAN line 107.021Year Coverage of Diagnosis: From 1992 to 2013, With Help of for Tis2000 Software, It Can Do Programming for Cars Before Year 2007Notice:1. It Can Only Support 12V Cars, No Trucks2. One Device only Has One 32MB Card As DefaultDescription:The for Vetronix Tech 2 comes with Authentic software and provides support for on board diagnostics on all systems 1992-2011.Specification:1) Microprocessor: 32 bit,16 MHz2) Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.3) Communications: Integral RS232 communication port.4) Screen: 3.8.8 backlit with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 Mb)An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.The Following Vehicles Utilize The CAN InterfaceFits for Allure (3.6L) 2005Fits for LaCrosse (3.6L) 2005Fits for Rainier (5.3L) 2005Fits for Rendezvous (3.6L) 2004-2005Fits for CTS (3.6L) 2004-2005Fits for SRX (3.6L / 4.6L) 2004-2005Fits for XLR (4.6L) 2004-2005Fits for STS (3.6L / 4.6L) 2005Fits for Cobalt (2.2L) 2005Fits for Corvette (6.0L) 2005Fits for Equinox (3.4L) 2005Fits for TrailBlazer (5.3L) 2005Fits for SSR (6.0L) 2005Fits for Envoy (5.3L) 2005Fits for G6 (3.5L) 2005Fits for GTO (6.0L) 2005Fits for Pursuit (2.2L) 2005Built in Card: 32MB PCMCIA card (included) .Package List:1 x Tester (With 32mb Pcmcia Card)1 x Can Diagnostic Interface Module (With Manual)1 x RS232 Cable1 x RS232-DB9 Adapter1 x DLC Cable1 x DLC Loopback Adapter1 x 12V Cigarette Lighter Power Cord5 x Adapter Connector1 x Battery Power Cord1 x Connector Module2 x Tis 2000 CD