for Phs-3c 2-in-1 pH & Temp Water Quality Analyzer with EU Plug

Phs-3c Ph/temp 2in1 Ph Tester Water Quality Analyzer Eu Plug f74 The PHS-3C pH meter is a portable microprocessor-based pH/temperature meter. The handy key board for the selection of the various functions.The possibility of automatically correcting errors in measurement due to temperature and the extreme simplicity of regulation all serve to permit a rapid and reliable execution of calibration and measurement.The display on the front panel reveals the temperature pH readings taken by the instrument. The instrument comes supplied with a combined pH electron and a probe for the measurement and compensation of the temperature.Specification:1.Range: PH: 0.00-14.00PH; Temp: 0-1002.Resolution:PH: 0.01PH; Temp: 0.1 3.Accuracy:PH: +/- 0.02PH; Temp: +/- 0.54.Display:PH: 4-digital LED; Temp: 3-digital LED5.Automatic Temperature Compensation:0-506.Power Supply: In Label7.Operating Temperature: 0-508.Calibration: 2 points with auto bufferrecognitionOperation:1.Connecting AC power supply. Turn on the meter by"ON-OEF" switch located back ofthe instrumen.2.Connect the electrode to the iack back of the instrument.3.Remove the protective cap of electrode. Put the electrode into the measured solution to be tested.Plug Type:EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so onColour: whiteMaterial: plasticPackage Contents:1 x Water Quality Analyzer setOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.