Product Name: LED C0B Upgrade Light Strip Kit Compatible Models: Compatible with for K2 PLUS Product Specifications: Light strip width 10mm, voltage 24V, 17W/m, 0.71A Notes:When cutting the light strip, pay attention to the cutting position. Since the light strip comes as a complete piece, users must cut and assemble the strip themselves. The cutting position must be where the copper is exposed. Strictly follow the positive-to-positive and negative-to-negative wiring. Users must confirm the correct polarity before applying power. Users can directly remove the adhesive backing of the light strip and affix it to the side of the machine without printing. You can also print a dedicated light strip bracket and install it on the machine, but tightening the screws inevitably leave marks on the machine. The light strip length is required to cut two side light strips and one front light strip, resulting in three strips. Please contact customer service for a link to print the dedicated light strip bracket. Color: As Shown Material: plastic Package Contents: 1 x light strip 1 set x accessories (random colors,don't accept the specified color) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.