["Operating voltage:DC12V can work in 9-14V range\r\nFan interface:2510-3P bend (pin spacing 2.54mm)\r\nFan current:Less than 0.8A\r\nfor Protection\tInput reverse connection protection\r\nClick the button switch to upshift and double click the downshift\r\nNo output overload for protection!!! Please note that the output should not be short circuited or overloaded\r\nDrive output range 5% -100 part fan low output may not turn,please adjust the fan can start the use of position\r\nOperating temperature:-20 Celsius to 60 Celsius\r\nTemperature probe parameters:NTC 50K B=3950\r\nProbe temperature:Small black for head 120 degrees\r\nRing probe 110 Celsius\r\nFan interface extends 8mm\r\nSetting parameters default factory Low speed 20%.\r\nAcceleration temperature 30\r\nAcceleration width 5\r\nDo not shut down the output\r\nAt this temperature setting,holding the probe with the for palm of the hand will accelerate in a few minutes.If the probe is clamped into the armpit,it will reach full speed in 2 minutes\r\nSize:4.9x1.8cm/1.93x0.71inch\r\nNote:\r\nPlease allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid\r\nDue to the difference between different monitors, the picture may not reflect the actual color of the item.Thank you!\r\n\r\nPackage Includes:\r\n1x for DC 12V Temperature Speed controler\r\n1x Probe"]