For Bypass Start Device Plug Start Car Tools Auto Obd2

FI-AT By-pass - Emergency Start Device Emulator will only work vehicles equipped with metal key. It 't work with a Smart Remote key The fastest procedure - car is ready to start right after plugging in Intelligent recognition of the ECU and car CarLabImmo tool - you can trust it 't let you down FI-AT By-pass - Emergency Start Device OverviewTo use Bypass you just need to connect it to the OBD2 socket in the car. The tool bypasses the immobiliser signal and allows you to start the car right after plugging it in. FI-AT By-pass - Emergency Start Device Usage Requirements:Car has to be equipped with mechanical key.Car has to be equipped with parts. The device will work only in case of a lost key.If the car is equipped with an SGW Module (some models starting from 2017 year), you need to use SGW Adapter in order to bypass Security Gateway Module How to use FI-AT By-pass - Emergency Start Device: Insert the device into OBD plug(In some models produced from 2017 year, you have to use SGW Adapter), the LED will start blinking fast.Turn the ignition ON - the LED will start blinking slowly.Start the car.If the LED keeps blinking fast after turning the ignition ON, take the key out, wait and turn the ignition ON again. Sometimes the procedure needs to be repeated again. Note:1.Installation guide not included, we strongly recommend you professional installation. 2.Please check as much as possible to make sure the item is what you need. 3.Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use 4.Due to the frequent replacement of the outer packaging of the manufacturer, please refer to the actual product for details, but the functions are the same Colour:Photo Color Material:ABS Package Contents: 1 x Bypass Emergency art Device Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.