RPi 2 W Microcontroller Board, Based on Official RP2350 Chip, Dual-core & Dual-architecture Design. Upgraded hardware from 2 with wireless communication, onboard antenna, features 2.4GHz 802.11n WIFI and Bluetooth 5.2. Adopts dual-core and dual-architecture design: dual-core Arm -M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz. Onboard CYW43439 wireless chip, supports WIFI 4 wireless and Bluetooth 5.2. Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. 26 x multi-function GPIO pins. 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels. Temperature sensor. 12 x Programmable I/O (PIO) state machines for custom peripheral support.<br><br>Colour:green Material:plastic The actual product may have slight color difference or difference, which not affect the use<br><br>Package Contents: 1 x Microcontroller Board<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.