1. Load the battery before and check whether the wires in the container have contact with the metal mesh, which is the key inspection step 2. Put in the grass powder. It is suggested the length of the grass powder is more than 5mm, which is more effective.Then tighten the lid. 3. In the and on the ground table, white is drawn and applied evenly, to sprinkling grass powder 4. Press the surface of the with the negative electrode electrical connector, as as possible, and then the grass planter to spraying the grass powder 2-3cm from the . 5. After the grass powder is finished, pour out the extra grass powder or a vacuum to suck it up.Trim the haystack with small scissors and a toothpick until it grows evenly. colour: black Material: metal Package Contents: 1 x flocking machine (without 2 x 1.5V batteries) 1 x small diameter net cover 1 x -diameter net cover 1 bag x grass 1 x brush 1 x planting template tool Only the above package content, other products are not included. Note: Light and different displays may the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.