PTC 360° hot air circulation The drying box can heat up quickly and has a built-in fan, which can circulate hot air 360° in the cavity, heat evenly, effectively dry wet consumables and improve printing effects. LCD touch screen The space helmet consumables drying box is equipped with a 3.7-inch touch screen, which is easy to operate and allows you to easily monitor the drying environment. One-click settings It has one-touch temperature settings for different filament types, supporting up to 12 types of filaments, including common and high-performance composite materials such as PLA- and PETG-. Of course, you can also freely adjust the temperature between 45℃-70℃. 48-hour timer function The heating time can be freely set from 0 to 48 hours to allow the filament to be fully dried to achieve better printing results. Parameter power-off memory function After a power outage, restart the machine and it still remember your previous materials and temperatures.No need to repeat settings, start drying quickly. Product Name:Space Helmet Consumables Drying Box Product Model:DB-03 Temperature control range: 45℃-70℃ Heating time: 0-48h Consumable diameter: 1.75mm/2.85mm (The product appearance and printed words depending on the batch, but this does not affect use) Plug Type:EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on. Voltage:AC100-240V Color:As Shown Material:ABS Package Contents: 1 * Filament Dryer Box 1 * adapter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.