Feature:1. The flexible coil current sensor is composed of a coil and a handle. The coil part has no exposed metal conductors. It is non contact measurement, safe and reliable.2. It is small in size, light in weight, exquisite in appearance, soft and flexible, and is suitable for narrow environments and places with dense cables.3. Using advanced Rogowski coil technology, it is a toroidal coil that is evenly wound on a non ferromagnetic material, with no hysteresis effect, almost zero phase error, no magnetic saturation, and extremely high linearity.4. The output signal is the differentiation of current to time. By integrating the output voltage signal, the input current can be truly restored, and the measurement current range can be from milliampere level to tens of thousands of amperes.5. Wide measurement range, strong reliability, bandwidth response frequency (0.1Hz‑1MHz), made of premium ABS material, long service life, long term use.Specification:Item Type: Current SensorMaterial: ABSModel: ETCR50FAUses: Electronics industry, power communications, equipment manufacturing, power grid maintenanceFunctionAC leakage current, large current, high-order harmonic current, complex waveform current, transient inrush current, phase, electric energy, power,Power factor and other detectionDetection methodFlexible coil CT: The output signal is the differentiation of current to time. By integrating the output voltage signal, it can be truly restored input CurrentCoil diameterΦ7.5mmMeasuring range0A～10000A～higherResolution10mAAccuracy grade±1.0%FS (50Hz/60Hz: 23℃±2℃, below 70%RH, the wire is at the center of the coil)Phase error ≤0.1°(50Hz/60Hz: 23℃±2℃)Output interface3.5mm audio frequency plug/BNC plug/tap (optional), cable length 2MElectric field interferenceNo hysteresis effect, free from external electric field interferenceWire positionThe wire to be tested is at the center of the coil, and the position error affects ≤±0.3%FSCurrent frequency45Hz～70Hz (frequency of measured current)Response frequency0.1Hz～1MHzLine voltageAC 1000V or less line testWorking temperature and humidity-20℃～50℃: below 80%rhStorage temperature and humidity -10℃～60℃: below 70%rhInsulation strengthAC 2000V/rms (both ends after the coil is unlocked)Production Compliance CAT IV 600V ,CAT Ⅲ 1000V.Package List:1 xCurrent Sensor