Item Type: Transformer Model: ETCR300FA Material: ABS Purpose: It can be equipped with an integrator and is easy to integrate into other equipment, such as phase detection analyzers, industrial control devices, data loggers, oscilloscopes, harmonic analyzers, power quality analyzers, high accuracy digital multimeters, transient shocks Recorders, distributed measurement systems, protection systems, etc. FunctionAC leakage current, high current, high order harmonic current, complex waveform current, transient inrush current, phase, electric energy, power, power factor, etc. detection. Detection MethodFlexible coil CT: The output signal is the differentiation of current with respect to time. By integrating the output voltage signal, the input current can be truly restored. Coil DiameterApprox.7.5mm / 0.3in Quantity Process0A10000AHigher Resolution10mA Accuracy Class1.0%FS (50Hz/60Hz; 232, Below 70%RH, the wire is at the center of the coil) Phase Error0.1(50Hz/60Hz; 232) Output Interface3.5mm Audio Frequency Plug/BNC Plug/Tap (Optional), Cable Length Approx.2m / 6.6ft Electric Field InterferenceNo hysteresis effect, no interference from external electric field Wire PositionThe tested wire is at the center of the coil, and the position error affects 0.3%FS Current Frequency45Hz70Hz (Frequency of Measured Current) Response Frequency0.1Hz1MHz Line VoltageLine Test Below AC 1000V Working Temperature and Humidity-2050; Below 80%Rh Storage Temperature and Humidity-1060; Below 70%Rh Dielectric StrengthAC 2000V/Rms (Both Ends of The Coil Unlocked and Expanded) Suitable For Safety RegulationsCAT IV 600V, CAT III 1000V