Feature:1. Composed of a coil and a handle, the coil part has no exposed metal conductors, non contact measurement, safe and reliable.2. Small size, light weight, exquisite appearance, soft and flexible, suitable for narrow environments and places with dense cables.3. This product with wide measurement range, high accuracy, strong reliability, response frequency bandwidth 0.1Hz‑1MHz.4. The toroidal coil evenly wound on non ferromagnetic materials has no hysteresis effect, almost zero phase error, no magnetic saturation, and extremely high linearity.5. Mainly used for the detection of AC leakage current, large current, high order harmonic current (up to 400 times), complex waveform current, transient impulse current, phase, electric energy, power factor, etc.Specification:Item Type: Flexible Coil Current SensorModel: ETCR150FAMaterial: ABSApplication: Electronics industry, power communications, equipment manufacturing, power grid maintenanceFunctionAC leakage current, large current, high order harmonic current, complex waveform current, transient inrush current, phase, electric energy, powerPower factor and other detectionDetection MethodFlexible coil CT: The output signal is the differentiation of current to time. By integrating the output voltage signal, it can be truly restoredInput CurrentCoil Diameter Approx. 7.5mm / 0.3inRange0A~10000A~higherResolution10mAAccuracy Class±1.0%FS (50Hz/60Hz; 23℃±2℃, below 70%RH, the wire is at the center of the coil)Phase Error≤0.1°(50Hz/60Hz; 23℃±2℃)Output Interface Approx. 3.5mm / 0.1in audio frequency plug/BNC plug/tap (optional)cable length: Approx. 2m / 6.6ftElectric Field InterferenceNo hysteresis effect, no interference from external electric fieldWire PositionThe tested wire is at the center of the coil, and the position error affects ≤±0.3%FSCurrent Frequency45Hz~70Hz (frequency of measured current)Response Frequency 0.1Hz~1MHzLine VoltageLine test below AC 1000VWorking Temperature and Humidity-20℃~50℃; below 80%rhStorage Temperature and Humidity-10℃~60℃; below 70%rhDielectric StrengthAC 2000V/rms (both ends of the coil unlocked and expanded)Suitable for Safety StandardCAT IV 600V, CAT Ⅲ 1000V.Package List:1 x Coil Current Sensor