Features: Environmentally friendly resin is synthesized by lactic acid extracted from corn. Good biocompatibility, lower smell and irritation than other resin. High toughness, the printed product is not easy to break, easy to process, able to withstand some impact and vibration. Fast curing speed, good fluidity, low shrinkage, smooth surface and high precision, perfect printing details. Compatible with 395nm to 405nm wavelength LCD 3D Printers. Widely used in industrial applications, architectural model, jewelry, dental care, toy design, daily design, etc. Any problem, please contact our store without hesitation. Honor to serve you. Specifications: Brand: eSUN Type: Bio-based Resin Color: White/Grey/Black/Skin Color/Transparent(Optional) Capacity: 1000g Bottle Material: Plastic Apply: For LCD 3D Printer Applicable Wavelength: 395nm to 405nm Curing Shrinkage: 5.52-5.97% Density: 1.07 to 1.13 g/cm3 Viscosity (25,MPa.s): 200 to 300MPa.s Tensile Strength: 35-50MPa Elongation at Break: 20%-50% Flexural Strength: 40-60MPa Flexural Modulus: 600-800MPa Impact Strength of Notch: 15-32j/m Surface Hardness: 75-80 Shore D Recommended Print Parameters Print Layer Thickness: 0.02-0.05mm Bottom Layer Quantity: 3 Bottom Layer Exposure Time: 30s Conventional Exposure Time: 6-10s Note: The exposure time shall be subject to the actual printing effect Bottle Size: 8.7 * 24.5cm / 3.4 * 9.6in Package Size: 28 * 12 * 10cm / 11.0 * 4.7 * 3.9in Package Weight: 1180g / 41.6oz Notes: 1. The product is for one-time use and can not be reused. 2. Environmental requirement: It is recommended that ambient temperature be controlled at 20-30, to avoid direct light during use, try to isolate children and pregnant women. 3. Wear mask and gloves before use to avoid direct contact with the skin and keep the room ventilated, protective measures should be taken and thoroughly cleaned after operation. 4. Store under cool, shade and dry environment without direct light, recommended storage at room temperature. 5. Shake the resin for 1 to 2 minutes before use to prevent sedimentation. 6. Due to light, screen resolution and other factors, there will be some differences between the actual color and the picture display color of the finished products. Please understand. Thank you. Packing List: 1 * Bottle Resin Material