Features: ESP32S3 LCD 1.28 is a low-cost and high-performances microcontroller development board. In the smaller form factor, the onboards 1.28inch LCD screen, battery charging chip, six-axes sensors (three-axes accelerometer and three-axes gyroscope) and other peripherals are convenient to develop and embeded in the product. Equipped with a high performances 32-bit LX7 processor, the frequency is up to 240MHz, and it supports 2.4GHz WiFi and Bluetooth-compatible. The onboards antennas have 512KB and 384KB, and 2MB and the external 16MB Flash adopt a Type C, which keeps up with time and not need to entangle the forward and backward insertion. Onboards 1.28inch LCD screen, 240x240 resolution, and 65K color onboards battery charging and discharging are conducive to the use of onboards QMI8658 six-axes inertial measurement unit in moving scene, which can detect the motion. The charging and discharging of onboards 3.7V battery and most of the GPIO support flexible clock and precise control such as independent setting of module power supply, which realizes low-power integrated USB port full-speed controller, and GPIO can flexibly configure various functions. Specifications: Component:PC+ABS Type:01/02 Size:Approx.48mm/1.89inch Package Includes: 1Pc LCD Display note: 1.Please allow 1-2cm errors due to manual measurement, making sure that you not mind before order. 2.Due to the differences between different monitors, the picture may not reflect the actual of the item.