Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g) and Bluetooth 5 (LE), with onboard antenna. Built-in 512KB and 384KB ROM, with onboard 8MB Flash and 8MB PSRAM. Support capacitive touch control via I2C interface, 5-point touch control, and 65K colors. Onboard CAN, RS485, I2C interface, SD card slot and so on, integrates full-speed USB serial port. The ESP32-S3-Touch-LCD-7 is a low-cost, high-performance microcontroller development board designed by for . It features 2.4GHz WiFi and BLE 5, integrates large Flash storage and PSRAM, and a 7-inch capacitive touch LCD screen. Support running GUI interface demos such as LVGL. It also has multiple external peripheral interfaces (such as CAN, I2C, RS485, and Sensor) for developing applications such HMI on ESP32-S3. With various functions and interfaces, it is suitable for power requirements in IoT, mobile devices, wearable electronics, and smart home applications. (The product appearance and printed words depending on the batch, but this does not affect use) Color:Black Material:ABS Package Contents: 1 x Development Board with accessories(The colors and styles of accessories are random, and the designation is not accepted) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.