M5StickC PLUS2 is an updated version of the M5StickC PLUS, featuring the ESP32-PICO-V3-02 chip as the main controller with built-in Wi-Fi functionality. This compact device integrates multiple components in a small form factor, including an infrared transmitter, microphone, LED, 6-axis IMU, buttons, passive buzzer, and more. It features a 1.14-inch TFT display with a resolution of 135 x 240, driven by the ST7789V2 controller. The device is equipped with a 200mAh lithium polymer battery and supports expansion via HAT and Unit series modules. This compact and versatile development tool is designed to enable rapid prototyping of IoT applications, simplifying the development process. Even users new to programming can create functional applications and deploy them in real-world scenarios using the M5StickC PLUS2. Power On: The device can be powered on by pressing BUTTON C for more than 2 seconds or by an external wake-up signal. After wake-up, the HOLD (GPIO4) pin must be set to a high level (1) during program initialization to maintain power; otherwise, the device will shut down automatically. Power Off: When no external USB power is connected, press BUTTON C for more than 6 seconds. Alternatively, during program operation, set HOLD (GPIO4) to low (0) to power off the device. Key Features: - ESP32-PICO-V3-02 main controller with Wi-Fi - Built-in 6-axis IMU - Infrared transmitter - Microphone - User buttons and 1.14-inch LCD display - 200mAh lithium polymer battery - Expansion socket for compatible modules - Built-in passive buzzer - Designed for wearable and wall-mounted applications Applications: - IoT terminal controller - Wearable devices - STEM education tool Note: Product appearance may vary slightly between batches, which does not affect functionality. Color: Yellow Material: ABS Package Contents: 1 x M5StickC PLUS2 IoT Development Board The package includes only the items listed above; other accessories are not included. Note: Lighting conditions and display settings may cause slight variations in color between the product image and the actual item. Measurement tolerances may vary by +/- 1-3 cm.