ESP32-C6-WROOM-1 modules with RISC-V 32-bit single-core processor supporting up to 160 MHz clock frequency. Integrated 320KB ROM, 512KB HP SRAM, 16KB LP SRAM, and 8MB Flash memory. Integrated 2.4GHz Wi-Fi 6 and Bluetooth LE dual-mode wireless communication for superior RF performance. USB Type-C interface eliminates the need for forward and reverse plugging. With CH343 and CH334 chips on board, one Type-C interface can fulfill the requirements of USB and UART development. Rich peripheral interfaces, pin-compatible with the ESP32-C6-DevKitC-1 development board, strong compatibility and expandability. Stamp hole design, can be directly soldered and integrated into the user's own design of the backplane. Supports a variety of low-power operating states, adjustable communication distance, data rate and power consumption balance to meet the power requirements of various application scenarios. The ESP32-C6-DEV-KIT-N8 is a compact microcontroller development board with multiple digital interfaces. In hardware, it adopts ESP32-C6-WROOM-1 module, which is equipped with RISC-V 32-bit single-core processor, supporting up to 160 MHz clock frequency, built-in 320KB ROM, 512KB HP SRAM and 16KB LP SRAM; the onboard CH343 Serial port and CH334 USB HUB dual chip can be used and developed through a USB-C interface for USB and UART, and the pin interface is compatible with ESP32-C6-DEV-KIT-N8. The CH343 serial interface and CH334 USB HUB dual chip on board can be used and developed through a USB-C interface for USB and UART, and the pin interface is compatible with the ESP32-C6-DevKitC-1 development board, which is compatible with the expansion of a variety of peripheral devices, and is more convenient to use. In terms of software, the ESP-IDF development environment can be selected for development, so that you can easily and quickly get startedand apply it to your products. Due to different product batches, the appearance may be different, which does not affect use. Type:A:Without p