ESP32C3 PRO MINI is an IoT mini development board based on the ESP32-C3 WiFi/Bluetooth dual-mode chip. ESP32-C3 is a 32-bit RISC-V CPU that includes an FPU (floating point unit) that can perform 32-bit single-precision operations and has powerful computing power. It has excellent RF performance and supports IEEE 802.11 b/g WiFi and Bluetooth 5 (LE) protocols. The board comes with a ceramic antenna and an IPEX antenna mount to enhance the signal strength of wireless applications. It also has a small and exquisite appearance combined with a single-sided mount design. It is equipped with a rich interface, with 11 digital I/Os that can be used as PWM pins and 4 analog I/Os that can be used as ADC pins. It supports four serial interfaces such as UART, I2C and SPI. There is also a small reset button and a bootloader mode button on the board. ESP32C3SuperMini is a high-performance, low-power, and cost-effective IoT mini development board, suitable for low-power IoT applications and wireless wearable applications.<br><br>Parameter: CPU: ESP32-C3, 32-bit RISC-V single-core processor, running frequency up to 160 MHz WiFi: 802.11b/g protocol, 2.4GhHz, supports Station mode, SoftAP mode, SoftAP+Station mode, mixed mode Bluetooth: Bluetooth 5.0 Ultra-low power consumption: deep sleep power consumption is about 43A Rich board resources: 400KB , 384KB ROM built-in 4Mflash. Chip model: ESP32C3FN4 Reliable security features: support -128/256, hash, , HMAC, cryptographic hardware accelerator for digital signature and secure boot Rich interfaces: 1xI2C, 1xSPI, 2xUART, 11xGPIO (PWM), 4xADC Onboard blue LED: GPIO8 pin Colour:Blue Material:PCB Specification: Soldered<br><br>Package Contents: 1 x Mini development board 2 x pin (random colors, don't accept the specified color)<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.