Type: Encoder code with Switch; Adjustment : ; Number of pulses: 20; Pin Numbers: 7(5 working signal pins & 2 mounting pins); Rated Voltage: 5 Volt. Shaft Diameter: 6mm/0.24inch; Shaft Height: 15mm/0.59inch; Thread Diameter: 6.8mm/0.27inch; Dimension: 15mm x 12.5mm x 25mm / 0.59inch x 0.49inch x 1inch(L x W x H). In the forward rotation, the A phase leads the B phase; when reversed, the B phase leads the A phase. The phase relationship and number of rotations of can be identified using a simple digital circuit ( OR gate and D flip-flop). By rotating the encoder can be counted in the direction and the reverse direction during rotation of the output frequency, unlike potentiometer count, this rotation counts are not limited. With the buttons on the encoder can be reset to initial state, that starts counting from 0. Applications: Industrial control, robots, photographic lenses, computer input devices, such as optical mechanical mice and trackballs, controllable stress rheometers. raspberry design sensor module design circuit board design dimming and sound 3D printer LCD display, etc. (car CD players, for volume & on/off control or data via LED or LCD display; perfect for use with PIC or microcontrollers.) Colour: silver + blue Material: metal Package Contents: 10 x Encoder Code Switch Only the above package content, other are not included. Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.