Electric Elbow Angle Grinding Tool Multifunctional Electric Metal Grinder

Feature:1. Elbow Angle Design: This electric angle grinding tool is designed with an elbow angle for easy maneuvering, which is suitable for narrow space and edge treatment.2. Adjustable Speed: This angle grinder tool is designed with adjustable speed, which can meet the needs of different materials and working scenarios, more flexible.3. High Performance Motor: This electric metal grinder adopts a high performance motor, which is stable and sturdy to ensure the effect and durability of long time working.4. Excellent Plastic Material: This angle grinder is made of excellent plastic material, which is sturdy and wear resistant, not easy to be damaged, and has a long service life.5. Wide Application: This electric angle grinder has a wide range of applications and can be used for woodworking, furniture processing, handicraft and DIY, etc.Specification:Item Type: Electric Angle GrinderMaterial: PlasticDisc Diameter: Approx. 12.5mm / 0.49inRated Input Power: 750WNo Load Speed: 11000rpmHow To Use:1. Use Requirements(1)The altitude is not higher than 1000m.(2)Ambient temperature: -15-+40.(3)Relative humidity should not exceed 90% when the temperature is 25.2. Before operated, the tool should be checked to see if the shell is cracked or broken. Wheel guard ring is tight, whether the wire is intact (forbidden to operate without the guard ring). Then turn on the switch and let the motor stand for a few minutes to determine whether the tool can rotate normally and freely.3. Each season the tool should be thoroughly inspected. In addition to the above, the insulation resistance should be measured and should not be less than 7 megohms (measured on a 500 megohm meter). More care should be taken during the rainy season. If it is not operated for too long, it should be dried if its insulation resistance is less than 7 megohms.(1) Carbon brushes should be checked regularly and replaced in time. After replacement, check whether the new brushes can move freely in the brush holder. See that the armature rotates correctly, then let the motor idle for 15 minutes to match the contact between the carbon brushes and the commutator(2) Keep vents clear and free of dirt. Clean out accumulated dust and old dirt regularly(3) In the course of normal running, if there is any abnormality, the power supply should be cut off immediately and overhauled by skilled and professional maintenance personnela. Armature jamming, abnormal decrease in speed or sudden stoppage of the motorb. The tool shakes abnormally. There are some abnormal noises and odors or the motor turns too hot.c. There are heavy sparks (>2 levels, GB755-65) or ring sparks.Package List:1 x Electric Angle Grinder1 x Handle1 x Disassembly Tool1 x Protective Cover1 x Manual2 x Carbon BrushesNote:1. Workers must wear protective goggles when using it, and the grinding wheel should avoid severe vibration to prevent cracking. 2. When cutting tools are operated with cutting discs, swinging the tools is not allowed, and the tools should be tilted at 15C. 3. The safety factor speed of the angle grinder is not less than 80m/s. 4. Replace the carbon brushes inside the black knobs at both ends of the machine's handle. 5. The motor head has a button to lock the angle grinder disc. 6. The tail end has a self locking button.