Feature:1. The electric drill has 18 torsion adjustments, which can be freely controlled according to requirements to protect the drill bit.2. The electric drill has a stepless variable speed switch, which can adjust the speed according to the pressure.3. The electric drill supports two-speed adjustment and forward and reverse rotation, flexible drilling and good heat dissipation.4. The electric drill has a compact structure, a pistol-style straight handle is easier to hold, and the drill chuck can work in a narrow area.5. The electric drill has a complete set, and the battery box can be charged at any time, which is suitable for large-scale engineering drilling work.Specification:Item Type: Electric DrillType: CW and CCW drillNo-Load Speed: 2000rpmPower Supply: Rechargeable-lithium battery technologyBattery: Rechargeable lithium battery, 1800mAhRated Output Power: 200WRated Torsion: 22NmElectric Drill Structure: Pistol typeSpeed regulation: 2-speedDrill Bit Clamping Method: Drill chuckHandle Structure: Rear straight handleUsing Time: About 150 minutesApplication: Screw drilling, unloading nuts, drilling woodChuck Diameter: Approx. 12mm / 0.5inMaximum Drill Diameter: Approx. 10mm / 0.4inRated Speed: 1200rpmWood Drilling: Approx. 20mm / 0.8inAluminum Drilling: Approx. 20mm / 0.8inSteel Drilling: Approx. 12mm / 0.5inAccessories: One battery one charging battery box.Package List:1 x Electric Drill1 x Battery Box1 x Adapter1 x User ManualNote:1. When operating, the operator should pay attention to whether the accessories are intact, whether the insulated cable is damaged, whether there is aging, etc. After the inspection, plug in the power source before proceeding.2. During cutting and grinding operations, there should be no people and explosives within one meter around, and do not work in the direction of people to prevent casualties.3. When the grinding wheel is used up and needs to be replaced, the power supply must be cut off to replace it, in case the switch is pressed accidentally, causing unnecessary personnel accidents.4. When working with dangerous and flammable materials, more than two fire extinguishers must be equipped to prevent problems. Achieve the principle of safety first and production second.5. If you use it after a long period of 30 minutes, you should stop resting for more than 20 minutes, and work after it cools down. To prevent the temperature from being too high during longterm use, which is easy to damage and cause industrial accidents.6. When in use, we must use it in accordance with the use specifications and instructions, and perform regular inspections, maintenance, and ensure that the work is in good condition to reduce the occurrence of accidents.