Key benefits - Smooth bevel for thin and thick boards: The bevel finish is smooth and can be applied to boards of varying thickness without additional tools or steps. - Designed for planing and deburring: This blade is optimized for planing and deburring tasks, delivering clean edges and reduced burrs. - Stepwise application for optimal results: The blade has a large angle and should be moved slowly, with pressure gradually increased, to achieve the best planing results. - R1 blade for banding (0.8-2 mm): The R1 blade is designed for banding tasks with a material removal range of 0.8-2 mm. What to expect - Works on both thin and thick boards to produce consistent chamfers and edges. - Not suitable for banding with the standard blade; use the R1 blade when banding tasks are required. How to use - Apply with a large angle and move slowly. - Begin with light pressure and gradually increase as you maintain control to achieve smooth, even removal. Use scenarios - Finishing edges on panels and boards in furniture or cabinet making, delivering clean, burr-free edges on both thin and thick stock. - Deburring and chamfering after routing or machining to produce safe, smooth edges on doors, frames, and trim. - Edge banding applications using the R1 blade: remove 0.8-2 mm precisely for veneer edging or similar banding tasks, achieving a controlled, uniform removal.