Nice tooler for making empty egg: Using this tool it is easy to make empty shell eggs, which is very helpful for Making Easter Eggs, or ordinary egg painting. Easy to Use: The Easy Egg Blower is the easy, quick and clean way to make blown eggs with only one hole. The simple hand pump design doesn't require mouth contact and allows for easy rinsing of the egg and tool. A hole on the top of the rubber pump, makes pump recoverd quickly after pressed. Blowing eggs is simple and gratifying with this handy tool.<br><br>Please note: the physical slightly color difference or difference, does not affect the use, please do not mind, thank you! 1: Drill one hole in the egg shell by drilling tool. 2: Assemle the needle and rubber pump, and then insert needle into the egg hole, then gently pump until the eggshell is empty. 3: Draw water into the pump to rinse the tool. You can also gently pump rinse water into the eggshell to clean it. NOTE: This tool is sharp,please use it carefully and keep it away from children.The usage of this item should be supervised by an adult when children are involved. The hole must be larger than the needle,let egg liquid come out. Do not press pump too quickly,should be slowly and softly,suddenly enter too much air,it may break eggs. At the beginning, may feel hard to press air into egg,just pull out needle,shake egg,let egg liquid come out,then insert needle again,so repeatedly. Maybe the connector will be loose when assemble or disassemble,just screw up. Colour:Black Material:Rubber+metal<br><br>Package Contents: 1 x Rubber Pump 1 x bend 1.0mm x 100mm 1 x straight 1.0mm x 100mm 1 x straight 1.6mm x 100mm 1 x Drilling Tool<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.