Dual Power Automatic Transfer Switch 2P Millisecond Fast Switching Timing Controller AC110V 100A

Feature:1. 2 OPERATION MODES: Power transfer switch support automatic operation or manual operation, the power supply is switched in milliseconds without interruption, has compact structure, reliable transmission, convenient installation and maintenance, long service life, widely used in various places where continuous power failure is not allowed2. MILLISECONDS SWITCHING: Automatic transfer switch is very useful, when the normal power supply is abnormal, the backup power supply works immediately, ensure the continuity, reliability and safety of the power supply3. STABLE AND RELIABLE: This automatic switch is suitable for 50 or 60Hz AC rated 100A emergency power supply system, possess stable performance and rest assured4. SAFE AND FLAME RETARDANT MATERIAL: This automatic transfer switch is made of excellent flame retardant PC materials and silver contacts, possess good insulation, high temperature resistant, aging resistant, safe and reliable5. WIDE APPLICATION: Power transfer switch adopt exquisite technology, isolation and interference resistant, self investment and self compound, widely used in families, shopping malls, factories, laboratories, farms and other occasionSpecification:Item Type: Dual Power Automatic Transfer SwitchProduct Model: NLQ3-125/2PMaterial: PC flame retardant and silver alloySwitch Type: Secondary power distributionRated Current: 100ARated Frequency: 50Hz/60HzElectrical Level: PC isolation typeAuxiliary Circuit: Two Relays, Each With Two Sets of Contact Capacity: AC110V50HZ le=5yTouch Time: <50msOperation Conversion Time: <50msReturn Time: <50msClosing Time: <50ms.Package List:1 x Dual Power Automatic Transfer Switch1 x User ManualNote:1. The maximum ambient temperature should not exceed 40, the minimum should not be lower than 5, and the average temperature within 24 hours should not be higher than 35.2. The altitude of the installation site should not be higher than 2000meter.3. When the maximum temperature reaches 40, the relative humidity of the installation site should not exceed 50%; when the temperature is the lowest temperature of 5, the relative humidity is higher, for example, if the temperature is 25, the relative humidity is 90%. Special measures should be taken to deal with occasional condensation on product surfaces due to temperature changes.