Feature: 1. [Automatic Transfer Switch] Ensure uninterrupted power supply to your devices with this 32A ATS, which switches to backup power millisecond switching, preventing power outages and protecting your equipment. 2. [Easy Installation] With its standard design, this PC grade power transfer switch is easy to install in any electrical system. Can be installed vertically or horizontally in the cabinet. 3. [High Performance] This 32A generator changeover switch is designed to handle high currents, suitable for AC systems between 50 to 60Hz. 4. [Versatile Application] Suitable for use in both residential and commercial settings, this dual power switch meets the requirements of various electrical systems. 5. [Reliable Construction] Crafted with flame retardant PC material, this dual power transfer switch is built to last, ensures reliable and safe operation in different environments. Specification: Item Type: Dual Power Automatic Transfer Switch Material: PC Flame Retardant Rated Current: 32A Grade: PC Frequency: 50 60Hz Standard: IEC60947-6 Rated Short Circuit Current Limitation (RT16-00/63A): 50KA. Package List: 1 x Dual Power Automatic Transfer Switch Note: Professional maintenance and inspection should be performed. To ensure the good performance of the ATS, the first maintenance and inspection should be conducted within 6 months of use. After that, maintenance and inspection should be conducted at least once a year. In harsh installation conditions, the frequency of maintenance and inspection should be increased. b: Please check if the electrical contact parts are deformed or damaged, and clean the surface.с: Metal particles and scorching around. Rust, oxidation, and dust on the contact surface can cause poor contact, so please perform manual operation and measure the necessary contact resistance: If the ATS is damp or unused for a long time, please wipe it dry before turning on the power. After removing the dust, use a 500V megohmmeter to measure the insulation resistance of the normal power and AC power. The load side and two poles, including insulation resistance, should not be less than 10MQ when using live parts and metal plates.