Double H-bridge design allows simultaneous control of two DC motors with a single channel current capacity of 7A and high power output. Wide voltage input range from 6.5V to 27V. Input signal is isolated via optocoupler, enabling direct control through IO port without interference. Features undervoltage protection to safeguard the module from damage due to instantaneous high current. Incorporates high-power and electrostatic discharge circuits to suppress transient interference and static electricity, improving EMC performance for stable and reliable operation. Designed for industrial applications. Product model: XY-160D Power supply voltage must be within 6.5V–27V; reverse polarity or exceeding 27V may cause permanent damage. A 15A fuse in series at the power input is recommended. Dual motor interface with a rated output current of 7A per channel and peak current up to 50A. Avoid short-circuiting the motor terminals. Use 10A fuses in series as recommended. Control signal voltage range: 3V–6.5V, supporting enable, forward, and reverse control signals. Enable signal terminal supports PWM input for speed control, with a frequency range of 0–10kHz and minimum pulse width of 10μs. Operating temperature range: -25°C to +80°C. Color: Red Material: PCB Package Includes: 1 x Dual DC Motor Drive Module Note: Other items not included. Color may vary slightly due to lighting and display settings. Measurement tolerance: ±1–3 cm.