["Description:\nbrand new and high quality\nFeatures:\nfor Cross joystick is a bi-directional 10K resistor, with the rocker in different directions, the tap resistance with the change. \nAdopts 5V power supply, the original state of X, Y read voltage of 2.5V or so, when pressed with the-arrow direction, the read voltage value increases with the maximum to 5V; -arrows in the opposite direction to press, read the voltage decreases , the minimum is 0V.\nInput voltage range: for DC 3.3V to 5V, long service life and stable performance\nTwo channels of analog output, one channel of digital output, X, Y axis output is two potentiometers, the twist angle can be read through AD conversion.\nSuitable for two-degree-of-freedom steering gear pan/tilt control or other remote proportional control, suitable for-arduino platform, for-arduino sensor interface.\n\nSpecifications:\nMaterial: Printed Circuit Board+ABS\nSize: Approx. 3.2x3.5 for cm/1.25x1.37 inch\n\nNote:\nPlease allow 1-2cm errors due to manual measurement,pls make sure that you do not mind before you mind. \nDue to the difference between different monitors, the picture may not reflect the actual color of the item.\n\nPackage Includes:\n1 Piece Dual-axis XY Joystick Module"]