Feature: 1. This motorized solenoid valve can be used to control fluid flow, pressure, temperature, liquid level, etc. 2. With low power consumption, high output power and low operating noise, ensuring high work efficiency. 3. Enables wide application in various fields, including energy, petroleum, chemical, metallurgy, etc. 4. Using metal gear as transmission gear, the driver guarantees stable and high pressure work. 5. Made of premium brass, wear resistant and giving the valve great durability for long time use. Specification: Item Type: Electric Motorized Valve Material: Brass Connection Method: 2 Way Type: Analog Working Voltage: AC 24V Pressure: 1.6 MPa Working Medium: Water Fluid Temperature: -1095 Pressure Nominal: PN16 Connection method: BSP (BS2) parallel female thread type. Flow characteristics: equal percentage, linear. Leakage rate: less than 0.05% of KV value. Function: By receiving the control signal output from the adjustment control unit, the final control component uses power operation to change the process parameters such as fluid flow, pressure, temperature, water level. liquid, etc. Application scenarios: Widely used in industrial automatic process control systems in power, petroleum, chemical, metallurgy, environmental protection, light industry, teaching and scientific research equipment. Package List: 1 x Electric Motorized Valve Note: 1. The control valve is a field instrument and the ambient temperature should be between -25-60 and the relative humidity should be 95%. If it is installed in the open air or in a high temperature place, sealing and cooling measures should be taken. Keep away from the vibration source or increase anti-vibration measures in the presence of a seismic source. 2. The control valve should generally be installed vertically. In special circumstances, it may be tilted. When the tilt angle is large or the valve itself is too heavy, the valve should be protected by supporting parts. 3. Generally, the installation pipeline of the control valve should not be too high above the floor or ground. When the height of the pipeline is more than 2 meters, the platform should be adjusted to facilitate steering wheel operation and maintenance. 4. The pipeline should be cleaned before installing the control valve to remove dirt and welding slag. After installation, in order to ensure that no impurities remain in the valve body, the valve must be cleaned again, that is, all valves must be opened when introducing fluid to prevent impurities from getting stuck. After using the handwheel mechanism, it must be returned to the original neutral position.