DMA Fuser Self Adaptive Resolution No Need Debugging HD Multimedia Interface Synthesizer 2K 144hz DMA Display Overlayer

Feature:1. [DMA Fuser] Used to optimize the efficiency of data transfer and processing, mainly for high bandwidth data transfer and processing scenarios, such as image processing, video encoding and decoding, network communication, etc.2. [2 Signal Input] The DMA fuser supports 2 way signal input, allowing output on a single display by overlay, the overlaid image quality can be adjusted for clarity.3. [Adaptive Resolution] The fuser supports switching between single screens for complete display, the resolution is up to 2K 144hz, no need to debug resolution, no need for EDID debugging, which is adaptive.4. [Easy to Use] The DMA combiner ensures clear image quality, providing lossless transfer, which has built in fan for temperature control heat dissipation, simple to operate, plug and display.5. [Wide Application] Suitable for securities trading floors, banking data centers, traffic safety emergency control centers, and video conferences.Specification:Item Type: DMA FuserMaterial: Aluminum AlloyInterface:1. HD Multimedia Interface Output: Connect to the main display (the main screen for playing games)2. HD Multimedia Interface 1 Host: Connect the host graphics card (computer for gaming)3. HD Multimedia Interface 2 Secondary Unit: Connect the secondary unit graphics card4. DC12V: Power cord supply (default 12V 2A)Indicator Light:1. D1: Power light (long on normal)2. D2: Fuser function on/off indicator light (long on fuser function on, not on fuser function off)3. H2: HD Multimedia Interface 2 secondary unit input signal light (long on normal)4. H1: HD Multimedia Interface 1 host input signal light (long on normal)Key Functions:1. Power: Power switch2. K1: Short press once: Cycle to switch resolution, 1920 x 1080, 2560 x 1440, 3840 x 2160, 2560 x 1080, 3440 x 1440, factory default 1920 x 1080. Long press for three seconds (hold down until displayed): The current resolution and refresh rate are displayed in the upper left corner of the screen, with the host information above and the secondary device information below3. K2: Short press once: Cycle to switch the upper layer cutout strength, with a total of 21 levels from 0-20, the factory default is 0 (0 also cutout)4. K3: Short press once: Restore the upper layer cutout strength to the factory default of 05. K4: Short press once: Turn on/off fuser function.Package List:1 x DMA Fuser1 x USB Cable1 x User ManualNote:6th generation relies on device built in compatibility, no manual adjustment of resolution is needed. Currently compatible with 95% of displays and computers.