Features:100% brand new and high qualitySupply voltage up to 48VDC, Peak output current up to 5.6AOptical isolation, input can be Common cathode, common anode, differential signal, pulse response frequency up to 200KHzLow speed zero vibration and low noiseStrong anti-interference ability, it can achieve high-precision positioning even in the harsh environment of the power gridApplication: automatic packaging machine, dispenser, engraving machine and other automation equipmentSpecification:Electrical performance (at ambient temperature Tj = 25oC)Input power: 24 ~ 50V dc power supply, capacity: not less than 200VA. Typical value: DC36VOutput current: 1.0A ~ 5.6A, adjustable in 8 grades, resolution: 0.5a.Drive mode: bipolar constant current PWM drive output.Insulation resistance: > 500m(normal pressure and temperature).Insulation strength: 500V/ min (normal pressure and temperature).Weight: 267 g / 9.4 oz(approx.)The signal interfacePUL+and PUL- are positive end and negative end of control pulse signal; DIR+ and DIR- are positive and negative ends of direction signals; ENA+ and ENA- are the positive and negative ends of the enabling signal. 24V requires a series of 2K resistorsMotor interfaceA+and A- are connected to the positive and negative ends of the a-phase winding of the stepping motor; B+ and B- are connected to the positive and negative ends of the B phase winding of the stepping motor. When A, Btwo - phase winding exchange, can make the direction of the motor reverse.The power interfaceDcpower supply is adopted, the working voltage range is suggested to be 20-50vdc, and the power supply is more than 100W. According to the actual use, it is appropriate to input DC40V or lessPackage list:1 x Driver Controller.