DIY Oscilloscope Kit Fully Assembled for Optional High Accuracy 2.4" TFT LCD

Features: This digital oscilloscope kit adopts ARM CortexM3 processor and with 2.4-inch TFT screen. It's easy and reliable for circuit operation. It can display frequency, period, pulse width, duty ratios etc This kit uses CortexM3 processor (STM32F103C8), and includes a 2.4inch color TFT display screen, can be used asARM test development board. Can be secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, dataloggers. With automatic, regular and One shot modes, easy to capture the waveform Can freeze at any time waveform display (HOLD function). Comes 1Hz /3.3V squarewave signal source. Waveform storage function: will not lose the waveform after power off. Short-circuit and open-circuit detection: can help the user find out the soldering error. TFT controller recognition function. Specifications: Real-time Sampling Rate: 1Msps Accuracy: 12Bit Sampling Buffer Depth: 1024 bytes Bandwidth: 0-200KHz Vertical Sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner) Input Impedance: 1M Input Voltage: 50Vpp (1: 1probe), 400Vpp (10: 1probe) The Horizontal Time Base Range: 10s / Div - 50s / Div (1-2-5 progressive manner) Supply Voltage: DC9V Board Size: approx 117x76mm / 4.6x3in Screen Size: approx 52x40mm / 2x1.57in Package Size: 18x12.5x3cm / 7.08x4.92x1.18in Package Weight: 119g / 4.21oz Types:Fully Assembled with Enclosure/Not Assembled with Enclosure Note: Please allow 0-1cm error due to manual measurement. please make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you Package includes: 1Set DIY Digital Oscilloscope Kit