Product Dimmable LED socket lights with motion sensor Infinitely adjustable brightness You can infinitely adjust the light intensity depending on the purpose and mood by holding the touch sensor. With the memory function, the lamp remembers the last brightness level set the next time it is turned on. (Tips: Only in AUTO mode has the dimming function.) 3 working modes-AUTO/ON/OFF The night light is simply plugged into the outlet and then set. A convenient switch allows you to choose between the three operating modes On, Off or Auto. Automatic pleasant lighting Set the switch to Auto. If it is dark in the room, the light is switched on by the motion detector. The light switches off automatically after approximately 20 seconds if no more movement is registered in the detection area. Read more 100% automatic: the lamp with motion detector is very practical, it just plug it into the socket and you can go to the bathroom in the evening without worries. No more searching for the light switch and turning on the full lighting Dimmable Night Light: You can continuously adjust the brightness to suit the room and your own needs. Not too bright to disturb your partners sleep, but bright enough to find your way around without tripping. 3 working modes: ON/OFF/AUTO AUTO motion detection mode: turns on and off automatically by infrared motion detection. ON mode: can also be switched as permanent light. Features: Infinitely adjustable brightness 3 modes: ON/OFF/AUTO Pleasant, glare-free lighting Motion detector/twilight sensor Extremely easy to use: plug into the socket, done Energy saving IP20 degree of protection Technical specifications:Mains voltage: 230V~50Hz PIR range: approx. 3 m, depending on surrounding light and location Horizontal/vertical PIR detection angle: 120/60Duty cycle: approx. 20 s Total consumption: approx. 1.0 watts Illuminant: LED (8 pieces, 60,000 hours) Light colour: White (2800K-3300K)