["Description:\r\nIt is one of the most useful tools that you might have to configure your plate. \r\nThis device is connected between the parabolic antenna.\r\nAnd its receptor and allows you to find the satellite, without having to use the meter on your TV. \r\n\r\nFeatures:\r\nbrand new and high quality. \r\nWith H/V and 22KHz indicators. Indicator lights for verifying that your receiver is set to Horizontal or Vertical polarity and if 22KHz tone is on or off. \r\nGreen H/V light indicates Vertical Polarity. Red H/V light indicates Horizontal Polarity. Red 22KHz light indicates 22KHz is ON. \r\nWhen aligning a C-band dish do not use your meter in front of the dish to avoid full scale readings. \r\nWhen connecting to a LNBF with gain higher than 65dB, insert a 5dB attenuator between the meter and the LNBF. \r\nIf a attenuator is not available you may use a long coax (60 feet or more) between the meter and the LNBF. \r\nIf the meter needle is jumping the sensitivity is too high. \r\nAdjust the S.A. level on the back of the meter by punching through the label where marked. \r\nBe very careful not to damage the adjustment by turning it too far or too hard.\r\n\r\nSpecifications: \r\nItem type: Satellite Signal Finder Meter\r\nModel: GSF-9502\r\nMaterial: Plastic + Metal\r\nMain Color: Black + Silver\r\nSize: 79×61×35mm/3.11×2.40×1.38in (Approx.)\r\nFrequency Range: 950-2150MHz\r\nPower Supply: 13-18V DC\r\nQuantity: 1 Set\r\n\r\nNote: \r\n1.Transition: 1cm=10mm=0.39inch\r\n2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.\r\n3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\r\n\r\nPackage includes: (With retail package)\r\n1 X Satellite Signal Finder\r\n1 X User Manual"]