Three measurement modes to choose from: real-time, peak, and first peak. These modes let you monitor ongoing force, capture the maximum peak value, or record the first peak during dynamic tests. Four units for selection and conversion: N (Newton), kg, lb (pounds), and oz (ounce). Display and convert between these units as needed to fit reporting requirements. Acceleration adjustment function: enter the exact acceleration value at the test site to improve test accuracy and unit conversion precision. Upper and lower limits for statistical analysis: set configurable limits to evaluate performance over time. A buzzer alerts when the measured value exceeds the set limits. Minimum force shielding function: data within the configured minimum range can be shielded from analysis to reduce noise and focus on meaningful signals. Use scenarios - Quality control in manufacturing: during fastener or component assembly, monitor applied force in real time or at peak values. Set upper and lower limits to ensure consistency, and rely on the buzzer alert to flag out-of-spec results. - Field testing and calibration: adjust the device to site-specific acceleration values to ensure accurate readings and conversions. Use the unit conversion options to align with client reports and documentation. - Laboratory analysis and data filtering: apply the minimum force shielding to exclude low-strength readings, focusing analysis on significant force events and improving data quality for research or testing workflows.