Digital Battery Capacity Checker Discharger Balancer Voltage Meter RC 2-6s Servo LiPo Li-Fe NiMH Battery Tester _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ 3 in 1 LCD RC Battery Discharger Balancer Meter Tester for 2-6s Lipo Li-Fe Battery Voltage Meter _x000D_ Feature: _x000D_ Balaner: The balance function can be executed before/after battery charged or during battery charging process, to ensure battery pack keeping in excellent condition. _x000D_ Convenient to use: it supplies instant voltage reading and indicates abnormal cell immediately. _x000D_ Application: Allow Li-Polymer/Li-Fe 2-6 cell balancing and discharging. _x000D_ Practical: With its JST connector for external power,the balancer measures voltage of receiver battery. _x000D_ _x000D_ Specification: _x000D_ Measurable battery type and amount: _x000D_ Li-Polymer/Li-Fe 2-6 Cell (standard voltage 7.4V-22.2V using divided voltage connector) _x000D_ Receiver battery: 1.2V-8.5V DC (Not battery type limit, but need external power 7.4V-11.1V, use JST connector) _x000D_ Balance voltage setting range (lower limit): 2.0V-3.9V _x000D_ (pre-setting value 3.3 V) _x000D_ Discharge voltage setting range (lower limit): 3.0V-4.2V _x000D_ (pre-setting value 3.9V) _x000D_ Discharge current (4.0V/cell): approx. 450mA _x000D_ _x000D_ Note: _x000D_ Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! _x000D_ Please allow 1-2cm measuring deviation due to manual measurement. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ 1 X Battery Discharger _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_