Feature: 1. This module is a 24V to 12V DC power converter, which is used for various buck voltage regulator equipment. 2. The buck module has automatic protection functions such as overcurrent, overvoltage, overheating, short circuit, etc. 3. Designed with potting and waterproof technology, all‑round protection, more stable and reliable. 4. Made of silicone and aluminum, waterproof, dustproof and shockproof, suitable for various harsh environments. 5. Commonly used in LED car displays, surveillance cameras, electric fans, water pumps, motors, photovoltaic energy numerical control equipment, etc. Specification: Item Type: DC‑DC Converter Material: Organic silicone + aluminum Model: GYVRM-JD1L241235 Input Voltage Range: 24V (DC16-40V) Output Voltage: 12V Rated Output Current: 35A Output Power: 420W Protection Level: IP67 Conversion Efficiency: Up to 96% Working Temperature: -20℃~+80℃ Installation Line Length: Approx. 13cm / 5.1in. Package List: 1 x Buck Module Note: 1. In order to ensure the normal operation of the converter within the input voltage range, the input voltage must not be lower than the minimum or maximum input value restricted by the product during use, and the input voltage value must be higher than the output voltage value by more than 2V. If there is no voltage difference of 2v, the output The value will be lower, but it will not damage (affect) the use of the converter.2. The input current must be greater than or equal to the required power of the output load device (for example, if the power of the load device needs 100w, then the input power must be greater than or equal to 100w). When the converter is in use, the current of the load device should not be greater than the maximum current value that the converter can withstand, and leave as much margin as possible for the converter to ensure that the converter works normally to achieve the highest conversion efficiency.3. The positive and negative poles of the converter cannot be reversely connected during use. Reverse connection may cause damage to the converter. It is recommended to add a suitable fuse to the input terminal during use.4. The chip works in light load mode when there is no load, and the output voltage may vary within a certain range.