1. 2.4G wireless high-power LED controller with Press remote control 2. The Press remote control adopts high-precision capacitive Press control technology. With the use of the Press color ring, you can select the desired color with one click, which is convenient and fast. 3. Each controller has a separate address code to prevent control confusion from causing control confusion. Each controller can be equipped with four remote controllers at the same time, which can realize multi-controller synchronous control. 4. Used to control all kinds of lamps that use LED as , such as: point , soft light bar, wall washer, glass curtain wall lamp, etc; 5. It has the advantages of convenient wiring and simple use; according to the actual needs of customers, it can achieve light changes such as jump, gradual change, and strobe. Controller working temperature: -20-60degree supply voltage: DC5V-24V output: 3 channels connection mode: common anode static power consumption: Less than 1W output current: Less than 8A (each channel) output power: 12V:Less than 288W, 24V:Less than 576W Press Remote Control working temperature: -20-60degree power supply mode: AAA * 3 supply voltage: 1.5V * 3 transmission frequency: 2.4Ghz standby power consumption: 0.015mW standby current: 60uA working current: 200uA emission current: 10mA remote distance: about 30m standby time: 6 months Precautions 1. Connect the load line first, and then the power line; make sure there is no short circuit between the input and output connecting lines before powering on. 2. The controller's power supply voltage range is DC5 ~ 24V, and exceeding the voltage range may burn the controller 3. It is recommended to remove the battery when the Press remote control will notbe used for a long time. colour:black Material:ABS + electronic components size:120*62*27mm Package Contents: 1*led controller kit 1*Manual Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.