DC12-24V 96W Mini Lathe Beads Machine Woodwork DIY Lathe Standard Set with Power carving cutter Wood Lathe  Features: - With high quality metal thick plate, metal dust cover, with strong convection hole for cooling - With full wire joints heat shrink tube wrapped - With large torque ball bearing motor - With pure steel structure drill chuck - Small volume, but with high precision, low-noise - Perfectly designed for home DIY enthusiasts Specifications: Power: 96W Voltage: DC 12 - 24V Chuck clamping range: 0.6 - 6mm Speed: 4000 - 8000 revolutions per minute seven speed control power supply Theoretical maximum clamping length: 180mm The theory of maximum turning diameter: 70 mm Precautions: 1. If the user does not have lathe base experience, when used, should follow: low speed, slowly, cautiously and other security operations. 2. The speed can be adjusted in 0 - 8000rpm, cut wood should not exceed 4000, grinding can use higher speed. 3. Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut. 4. If not a cylinder, the speed should be reduced. 5. Tailstock bearing without lock tight. 6. When using a knife, locking the bottom of screw, location should be away from timber 1 - 1.5cm. 7. If you do not really understand the operation, it is best to consult a professional person.