10-60V wide input voltage, suitable for most supplies on the market as input source.Output voltage and current, voltage and current continuously adjustable. It can meet most electric equipment.High output , good ventilation and natural heat dissipation can reach 280W/12A (pay attention to the limitation of output and output current).The module adopts step rectification scheme, with high efficiency. The output voltage is more than 10V, and the efficiency is more than 92%-96%.There is a current indication when charging the battery. The charging state is clear at a glance.The input has a 15A fuse, and the input positive and negative poles are connected reversely, which will not damage the supply (the fuse will burn, and the fuse needs to be replaced). Product model: SZ-BK0612. Module name: 400W step-down voltage current. Module nature: non isolated buck module. Input voltage: 10.5-60V.Output voltage range: 0-45V (must meet the step-down conditions, in input multiplied by 0.8).Minimum output voltage: 0V (+ 1V). Maximum output voltage: about equal input*0.8 (for example, the input is 40V, 40V*0.8 = 32V, the maximum output voltage is 32V, which will actually be higher to about 34V.35) Output current: 0.2-15A (continuously adjustable, heat dissipation shall be strengthened if it exceeds 12A). Maximum output : 400W (it is necessary to add a fan to forcibly heat the heat sink and magnetic ring). Continuous maximum working : 280W (in ventilated environment). Continuous maximum working current: 12A (in ventilated environment). Input undervoltage protection: Yes, (the input is lower than 10.5V, the output is closed, and there is an error of about 0.5V) Input overvoltage protection: none (overpressure prohibited). Working temperature: -10 ~ + 85 (heat dissipation shall be strengthened when it exceeds 65). Operating frequency: 100kHz. Conversion efficiency: up to 97% (efficiency is related to input and output voltage, current and voltage difference). Short circuit protection: Yes ( current protection) Input reverse connection protection: Yes (in case of short circuit, input reverse connection shall be cautious, which will burn the input fuse) Output anti backflow: none (when charging the battery, the output is connected to inductive load, for example, the anti backflow diode must be added to the motor) Work indicator light: Yes (blue LED light) current indicator: Yes (the CC indicator red light on the small board is on when the current is working, there is no current output, and this light is not on when the voltage is working) Wiring mode: self equipped welding free 25A wiring terminal Module size: length 60, width 60 mm, height 45 mm Wiring: "input / in" is input. "Output / out" is output (marked in Chinese) Colour:As shown Material:Plastic + Metal Package Contents: 1 x High- Buck Converter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.